Intergraph TD-300 Maintenance Manual - page 35
Chapter 2 -- Configuring the System 21
WARNING
Do not change values in the Registry other than as directed. If you
introduce incorrect values into the Registry, you may cause serious
operating system problems, and you may have to reinstall Windows NT.
If you change values in the Registry that make your system unusable,
you may be able to restart the system and use the Last Known Good
Configuration option to undo the damage. Refer to the Windows NT
Workstation Installation Guide for more information on the Last
Known Good Configuration option.
➤
To change the dual-screen style:
1.
Start the Registry Editor (REGEDT32.EXE) to open the Registry.
2.
Open the following subkey in the Registry:
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\
mgax64\Device0
3.
In the right-hand pane of the Registry Editor window, select
User.CenterDialogs.
4.
From the Edit menu, select DWORD.
5.
To enable Primary Top/Left style, type 0 into the Data box. To enable
Full Canvas style, type 1 into the Data box.
6.
Select OK.
7.
Exit from the Registry Editor.
8.
Restart the system.
Changing the Default Video Display Driver
After configuring the video display and restarting the system, you can
configure the system to use the Intergraph G95 video display driver instead
of the Windows NT VGA display driver by default.
➤
To change the default display driver: