Intergraph TD-300 Maintenance Manual - Closing The Base Unit
Other manuals for TD-300:
Maintenance Manual
of
138
42 Chapter 3 - Opening and Closing the Base Unit
➤
To attach a reusable antistatic wrist strap:
1.
Attach an antistatic wrist strap to the ground loop as shown in the
following figure.
2.
Slip the elastic end of the wrist strap snugly around your bare wrist.
Note:
The metal conductor bead in the elastic must contact bare skin.
Closing the Base Unit
When securing panels with screws, ensure the screws are tight, but do not
strip the screw heads.
➤
To close the base unit:
1.
Remove the antistatic wrist strap from the metal inside the base unit.
2.
Replace the PCI access panel if removed.
Ground
Loop