Intergraph TD-300 Maintenance Manual - page 134
Other manuals for TD-300:
Maintenance Manual
of
138
120 Appendix A -- Installing System Software
3.
Read the displayed information, and then press any key to return to
the Main Menu.
4.
Select Exit or press
ESC
to quit the installation program.
5.
Reconfigure Microstation using the USCONFIG utility, as described
in your Microstation documentation.
q
Update the System with the QFE Diskette.
If your system was shipped with a Quick Fix Engineering (QFE) diskette,
insert the QFE diskette into the floppy drive. Refer to the README.TXT
file on the QFE diskette for instructions on how to update the system.