Intergraph TD-300 Maintenance Manual - Driver.
Appendix A - Installing System Software 117
7.
To load the mouse driver automatically upon system boot, select
Change the AUTOEXEC.BAT file.
To manually load the mouse driver, select Preview Changes, or Skip
Changes. You must key in the following at the MS-DOS command
prompt each time you want to install the mouse driver.
c:\pmouse\pmouse.com
8.
When prompted, select Exit Installation to exit from the installation
utility.
9.
Read the displayed information, and select OK.
10.
Remove the diskette from the floppy disk drive; then select Restart
Windows to restart the system.
11.
After the system restarts, the Primax Mouse Control Panel opens,
allowing you to customize the driver settings. You may configure
cursor appearance and performance, and define mouse-related hot
keys.
For more information, refer to the README.TXT file delivered with the
Primax mouse software.
q
Install and configure the G95 video display
driver.
Windows 95 does not install the G95 video display driver during Windows
95 installation. You must manually install the G95 video display driver.
➤
To install the G95 video display driver:
1.
Insert the diskette containing the G95 video display driver into the
floppy disk drive.
2.
From the Windows 95 Start menu, select Run.
3.
In the Run dialog, type a:\setup.exe; then select OK.
4.
When prompted, select Next to accept the default destination path.