Intergraph TD-300 Maintenance Manual - Installing System Software
105
Appendix A
Installing System Software
Follow the procedures in the appropriate section of this appendix to install
the operating system and associated system software on your workstation.
Note:
For instructions on installing the Solaris 2.5 for x86 operating
system, refer to Intergraph’s Workstation Software Configuration for
Solaris 2.5 for x86.
Installing Windows NT Workstation
Complete the following checklist if you must install Windows NT
Workstation software on your Intergraph system. Most of these steps are
described in detail in the Windows NT Workstation Installation Guide.
Certain steps refer to system software that is specific to your Intergraph
system; instructions for installing this software are covered in this document.
Where appropriate, notes on other installation steps are also provided.
q
Collect backup media and documentation.
Before installing Windows NT Workstation, collect the following media and
documentation delivered with the system:
♦
The Windows NT Workstation CD-ROM disc, and diskettes containing
Windows NT setup software.
♦
The Intergraph backup diskettes delivered with your system. Depending
on your system configuration, these diskettes may include the following:
Software
Diskette Name
G95 video display driver
G95W95DRV
System configuration utilities
SYSUTIL
Quick Fix Engineering (QFE) updates
QFE
♦
The Windows NT Workstation Installation Guide.