Server Technology switched pro2 User Manual - page 103
Switched PRO2 – User Guide
Using the Web Interface
•
103
View-Only user with environmental monitoring allowed and all outlet and group access rights:
sti-view Auth-Type := Local, User-Password == "view"
STI-Access-Level = View-Only,
STI-Env-Mon = Yes,
STI-Outlets = "ALL",
STI-Outlets = “ALL”
Network > SNMP
The SNMP page provides the protocol and agent configuration options for SNMP support.
About SNMP Versions
• The firmware supports SNMP v1, v2c, and v3.
• SNMP version 3 supports authentication and encryption on a per user basis. Authentication types are None
and MD5. Encryption types are None and DES. If you use authentication, you must use encryption.
• Two SNMPv3 users are supported: one user with read-write (RW) access, and one user with read-Only
(RO) access Both users have the same configuration parameters, and you can configure each user
independently.
• SNMPv2c and SNMPv3 can be enabled or disabled independently. You can have SNMPv2 and/or
SNMPv3, or none.