Server Technology switched pro2 User Manual - page 22
Switched PRO2 – User Guide
Getting Started with the Firmware
•
22
User Access Rights
The following table defines the user rights granted by the administrative user for access to PRO2 operations using
either the Web GUI or the Command Line interface (CLI). Only the options for which the user has access rights will
be available in the firmware for the user.
User Access Level
(highest to lowest)
Description
Administrator
Administrative user; full access for all configuration, user management, all outlet power control
actions (On, Off, Reboot), status, and serial/pass-thru ports.
Power User
Full access for all outlet power control actions (On, Off, Reboot), status, and serial/pass-thru
ports.
Note: The Power User does not have access to user management.
User
Partial access for outlet power control actions (On, Off, Reboot), status, and pass-thru of
assigned outlets, outlet groups, and serial/pass-thru ports.
Reboot-Only User
Partial access for outlet power control actions (Reboot), status, and pass-thru of assigned
outlets, outlet groups, and serial/pass-thru ports.
On-Only User
Partial access for outlet power control actions (On), status, and pass-thru of assigned outlets,
outlet groups, and serial/pass-thru ports.
View-Only User
Partial access for status and pass-thru of assigned outlets, outlet groups, and serial/pass-thru
ports.
The administrative user can also grant administrative-level rights to other user accounts, allowing the PRO2 unit to
have more than one administrative user.
Administrative access rights cannot be removed from the default admn user account until an administrative user
grants administrative access rights to another user account.
To use administrative commands, the user must be granted administrative user access rights.