Server Technology switched pro2 User Manual - page 71
of
213
Switched PRO2 – User Guide
Using the Web Interface
•
71
Configuring Outlet Power Thresholds
Click the outlet power thresholds link at the bottom of the Outlets page to display the configuration page:
To set outlet power thresholds:
1. Provide the threshold hysteresis between event state and recovery (W). Range is 0-1000W; default is 10W.
2. Set the low/high alarm and low/high warning threshold values (W) for outlet power (without power factor).
Range is min 0W, max is power capacity in ostat details command.
3. Click Apply.