Server Technology switched pro2 User Manual - page 174
Switched PRO2 – User Guide
Using the Command Line Interface (CLI)
•
174
set sntp
Sets SNTP configuration values.
Command Syntax
set sntp dst [disabled | enabled]
set sntp dst [end | start]
set sntp gmtoffset
set sntp primary
set sntp secondary
Parameters
The set sntp command uses the following parameters:
dst
Sets to automatically adjust for Daylight Saving Time (DST).
gmtoffset
Sets the adjustment from Coordinated Universal Time (UTC).
(-12 to 14). GMT Offset includes both extended hours and minutes.
primary
Sets the first SNTP server. 0-63 characters.
secondary
Sets the second SNTP server. 0-63 characters.
Sub-Parameters
The set sntp command uses the following sub-parameters:
end
Date to end DST.
start
Date to start DST.
Command Access
Admin level only; no access in Demo mode
set spm
Sets Sentry Power Manager (SPM) access configuration values.
Command Syntax
set spm [disabled | enabled]
set spm resetpw
Parameters
The set spm command uses the following parameter:
resetpw
Sets to reset SPM secure password back to default.
Command Access
Admin level only; no access in Demo mode