Server Technology switched pro2 User Manual - page 97
Switched PRO2 – User Guide
Using the Web Interface
•
97
Network > FTP
The FTP configuration page allows configuring the settings required for the FTP client to perform FTP firmware
uploads and automatic system uploads/downloads.
To configure FTP client options:
1. Type the hostname/IP addresses in the Host field (IPv4 or IPv6 format).
2. Type the FTP username in the Username field, 1-32 characters, spaces are allowed.
3. Provide a password for the FTP username. To change the password, check the Change box and type the
new password.
4. Type the file path to be uploaded to the Directory field.
5. Type the filename to be uploaded in the Filename field.
6. The PRO2 is capable of scheduling automatic firmware updates. When enabled and configured, the PRO2
regularly checks the FTP server for a new firmware image and uploads the image. To enable Automatic
Updates, check the Enable checkbox.
7. From the Scheduled Day and Scheduled Hour drop-down menus, select the desired day/hour for the
automatic update.
8. The FTP upload configuration validates that the unit is able to contact and log into the specified FTP
server, download the firmware file, and verify that the firmware file is valid for the unit. To initiate the test,
click the Test button.
To configure FTP server options:
1. In the FTP Server area at the bottom of the page, check the Enable checkbox.
Notes:
• The FTP server must be enabled for configuration upload or download.
• Secure File Transport Protocol (SFTP) is also supported for encrypted SSH transport over the network.