Server Technology switched pro2 User Manual - page 135
Switched PRO2 – User Guide
Using the Command Line Interface (CLI)
•
135
Command
Description
Turns on the specified outlet or outlet group.
Displays the latest status and metrics for all outlets in the system.
Changes the password for the current local user.
Tests the ability of the PRO2 to contact an IP address for another Ethernet-enabled device.
Displays the latest status and metrics for all phases in the system.
Turns off the specified outlet or outlet group, and then turns it back on after a delay.
Remove Commands
The Remove command group removes outlet groups, LDAP groups, UPS devices, and
local users from the system.
Removes an outlet group from the system.
Removes an LDAP group from the system.
Removes a UPS from the system.
Removes a local user from the system.
Restarts the system.
Displays the latest status and metrics for all sensors in the system.
Set Commands
The Set command group sets the configuration values for numerous system areas.
Sets user configuration access.
Sets the system banner that displays before a user authenticates a user session.
Sets Bluetooth
®
configuration values.
Sets branch configuration values.
Sets cord configuration values.
Sets DHCP configuration values.
Sets Domain Name System (DNS) server configuration values.
Sets email configuration values.
Sets Cisco EnergyWise configuration values.
Enables new system features.
Sets FTP configuration values.
Sets HTTP configuration values.