Server Technology switched pro2 User Manual - page 108
Switched PRO2 – User Guide
Using the Web Interface
•
108
Assigning User Access Rights to TACACS+ Privilege Levels
1. At the bottom of the TACACS+ screen, click the TACACS+ Privilege Levels link to display the following edit
page which shows the current user access level for each TACACS+ privilege level.
2. For a privilege level shown in the above list, click Access to display the Privilege Level Access page:
3. Check individual boxes to grant user access (or uncheck boxes to deny access) to specific system
resources: monitors, remote ports, outlet groups, and individual outlets. To grant (or deny) access to all (or
none) of the resources in a group, click All or None.
4. Click Apply.
Privilege level 15 is assigned by default for
administrator access rights to all PDU
resources. Level 15 cannot be changed.
Click link to configure the TACACS+ network.
protocol.