Server Technology switched pro2 User Manual - page 153
Switched PRO2 – User Guide
Using the Command Line Interface (CLI)
•
153
Command Access
Admin level only
set banner
Sets the system banner that displays before a user authenticates a user session.
Command Syntax
set banner
Parameters
The set banner command uses the following sub-parameters:
banner text
Text for system banner, 0-2070 characters.
Usage Guidelines
• The banner accepts all printable ASCII characters, plus CRLF.
• CTL-Z terminates banner input.
Command Access
Admin level only; no access in Demo mode
set bluetooth
Sets Bluetooth
®
configuration values.
Command Syntax
set bluetooth [disabled | enabled]
set bluetooth discover [disabled | enabled | limited]
set bluetooth name
set bluetooth pincode
set bluetooth transpwr
Parameters
The set bluetooth command uses the following parameters:
discover
Sets the discoverability of the Bluetooth module.
name
Sets the name of the Bluetooth module (1-31 characters).
pincode
Sets the pin code used for Bluetooth pairing (0000-9999).
transpwr
Sets the transmission power for Bluetooth communications.
Sub-Parameters
The set bluetooth command uses the following sub-parameter:
limited
The Bluetooth module will be discoverable to 60-seconds after the
module button has been pressed.
Command Access
Admin level only; no access in Demo mode.