Server Technology switched pro2 User Manual - page 166
Switched PRO2 – User Guide
Using the Command Line Interface (CLI)
•
166
set outlet
Sets outlet configuration values.
Command Syntax
set outlet branchevent [disabled | enabled]
set outlet chglogging [disabled | enabled]
set outlet email [disabled | enabled]
set outlet load [alarmhi | alarmlo | warnhi | warnlo]
set outlet load hyst
set outlet name
set outlet snmpt [disabled | enabled]
set outlet watts [alarmhi | alarmlo | warnhi | warnlo]
set outlet watts hyst
For Switched PRO2 products only:
set outlet extondelay
set outlet host
set outlet lock [disabled | enabled]
set outlet rebootdelay
set outlet script [disabled | enabled]
set outlet script delay
set outlet seqdelay
set outlet shutdown [disabled | enabled]
set outlet shutdown delay
set outlet wakeup [on | off | last]
For the enabled Smart Load Shedding feature:
set outlet contactevent [disabled | enabled] ALL> set outlet lineevent [disabled | enabled] set outlet sensoraction [off | on] set outlet tempevent [disabled | enabled] set outlet upsevent [disabled | enabled] set outlet waterevent [disabled | enabled] ALL> For AC products only: set outlet pf [alarmlo | warnlo] set outlet pf hyst Parameters The set outlet command uses the following parameters: branchevent Sets if load shedding (due to branch events) is allowed for an outlet. chglogging Sets logging for system outlet state changes contactevent Sets if load shedding (due to contact sensor events) is allowed for an outlet. email Sets email notifications for outlet events.