Server Technology switched pro2 User Manual - page 52
Switched PRO2 – User Guide
Using the Web Interface
•
52
Configuration (Setting Values)
The Configuration section allows administrative access to all options for setting PRO2 values. The pages are
organized into three major areas of configuration:
• System (options for PRO2 hardware areas)
• Network (options for setting up network protocols)
• Access (options for local/remote user access and management)
System > About
The About page allows: (1) reference for system-wide configuration data, (2) configuration of the system location,
and (3) the option for a blinking system location on PRO2 GUI monitoring pages.
Viewing system reference information:
• Uptime: Cumulative time the PRO2 has been up and running since the last unit restarted. Shows
continuous, real-time system updates with an approximate 5-second automatic refresh. A manual refresh is
not required.
• Firmware: Current firmware version.
• Build Info: Displays revision number and date/time of most recent firmware version build.
• Boot Info:Identification number from the system boot loader.
• Hardware:Displays information about the PCB used in the PRO2 unit.
• Ethernet NIC S/N: The serial number of the PRO2 derived from the Ethernet NIC.
• Active Users: Number of users currently logged in.
To set the blink option:
1. Type a descriptive PRO2 location name that appears in the system eader section of every Web interface
page (upper right corner).
2. (Optional) Check the Blink checkbox to enable blinking of the PRO2 location string (IP address) on the
Web interface pages. Even if Blink is enabled, the blinking may not work with all web browsers.
3. Click Apply.