Server Technology switched pro2 User Manual - page 137
Switched PRO2 – User Guide
Using the Command Line Interface (CLI)
•
137
Command
Description
Sets configuration values for local user access rights.
Sets the wireless network configuration (for the WLAN solution on specific Wi-Fi capable
PRO2 units).
Show Commands
The Show command group displays the current configuration values in the system.
Shows user access configuration values.
Shows Bluetooth configuration values.
Shows branch configuration values.
Shows cord configuration values.
Shows email configuration values.
Shows Cisco EnergyWise configuration values.
Shows the enabled system features.
Shows FTP configuration values.
Shows LDAP configuration values.
Shows line configuration values.
Shows Smart Load Shedding configuration values.
Note: Only available if the Smart Load Shedding feature is activated.
Shows the system event log.
Shows network configuration values.
Shows over-current protector (OCP) configuration values.
Shows outlet configuration values.
Shows phase configuration values.
Shows port configuration values.
Shows Radius server configuration values.
Shows sensor configuration values.
Shows outlet shutdown configuration values.
Shows SNMP configuration values.
Shows SNTP configuration values.