Server Technology switched pro2 User Manual - page 45
Switched PRO2 – User Guide
Using the Web Interface
•
45
Temperature/Humidity Sensor Status
Status
Description
Found
The PRO2 found the sensor and connection is established.
Not Found
On a fresh reboot, the PRO2 does not find a sensor.
Lost
The connection to a previously found sensor is now lost.
No Comm
Communication loss occurred due to a hardware issue (not loss of communication with the probes).
1
1
The ENV part of the sensor supports two temperature/humidity (T/H) probes as part of the master unit, two T/H probes as part
of the link unit, and the optional EMCU-1-18 (which can support two T/H probes, four contact-closure monitoring points, and one
water sensor). The “No Comm” sensor status is not loss of communication with the probes themselves.