Server Technology switched pro2 User Manual - page 176
Switched PRO2 – User Guide
Using the Command Line Interface (CLI)
•
176
set tacacs
Sets TACACS+ server configuration values.
Command Syntax
set tacacs primary
set tacacs secondary
set tacacs port
set tacacs key {key}
Parameters
The set tacacs command uses the following parameters:
primary
Sets the first TACACS+ server (0-63 characters).
secondary
Sets the second TACACS+ server (0-63 characters).
port
Sets the port for the TACACS+ servers 1-65535 (default is 49).
key
Sets the key for authentication with the TACACS+ servers.
Command Access
Admin level only; no access in Demo mode
set tacpriv
Sets TACACS+ configuration values for privilege level access rights.
Command Syntax
set tacpriv access [admin | ononly | poweruser | rebootonly | user | viewonly]
set tacpriv sysmon [disabled | enabled]
Parameters
The set tacpriv command uses the following parameters:
access
Sets the access type for a level.
Note: On-Only, Reboot-Only, and View-Only are available for Switched
PRO2 products.
sysmon
Sets the system monitor access for a level.
Sub-Parameters
The set tacpriv command uses the following sub-parameter:
priv level
The ID of the TACACS+ privilege level to change access rights (0-15).
Command Access
Admin level only