Server Technology switched pro2 User Manual - page 107
Switched PRO2 – User Guide
Using the Web Interface
•
107
Network > TACACS+
The TACACS+ page allows configuration for TACACS+ server options, encryption key, and user privilege levels.
To configure TACACS+ server options:
1. Type the hostname/IP address in the Primary/Secondary Host fields (IPv4 or IPv6 format).
2. Type the new port number or accept the default 49 as shown in the screen example. The PRO2 uses the
port number to send TACACS+ requests.
3. Click Apply.
About the TACACS+ Encryption Key
The encryption key is used to encrypt all data packets between the PRO2 and the TACACS+ server:
• The key must match the key configured on the TACACS+ server.
• The key can be up to 60 alphanumeric characters and is case sensitive.
• For security, characters in the key are not displayed.
• If you provide “0” for the key, the result may be that the key is not applied, as “0” may not be supported by
the TACACS+ server. It is recommended for product environment and security not to
enter “0” for the key.
• The Encryption Key Status field on the screen displays “(set)” or “(not set)” to indicate current status of the
key.
To configure the encryption key:
1. Type the New Encryption Key in the field provided.
2. In the Verify New Encryption Key field, retype the key.
3. Click Apply.
The Change Access Configuration link takes
you to the Access page to determine user
access method for TACACS+.
Click link to configure privilege levels.