Server Technology switched pro2 User Manual - page 197
Switched PRO2 – User Guide
Using the Command Line Interface (CLI)
•
197
show sntp
Shows SNTP configuration values.
Command Syntax
show sntp
Command Access
Admin level only
Example
Switched CDU: show sntp
SNTP Configuration
Local Date/Time: 2014-05-06 14:30:41 (DST)
Primary Host: 2.servertech.pool.ntp.org
Secondary Host: 1.servertech.pool.ntp.org
Local GMT Offset: -8:00 hours
Daylight Saving Time: enabled
DST Start: 2nd Sunday in March at 02:00:00
DST End: 1st Sunday in November at 02:00:00
show syslog
Shows Syslog configuration values.
Command Syntax
show syslog
Command Access
Admin level only
Example
Switched CDU: show syslog
SYSLOG Configuration
Host 1:
Host 2:
Port: 514
Protocol: RFC3164
Debug Messaging: disabled