Server Technology switched pro2 User Manual - page 21
Switched PRO2 – User Guide
Getting Started with the Firmware
•
21
The User Interfaces
The Switched PRO2 offers two built-in user interfaces:
• Web interface (GUI) accessed via HTTP-enabled Ethernet connections.
• Command Line Interface (CLI) for serial and Telnet connections.
Both interfaces allow power monitoring of PIPS/POPS data points, temperature/humidity measurements,
system/network configuration, outlet control, ST Eye Bluetooth
®
connection, user account management, and
numerous other operations for the Switched PRO2.
Either interface can be used as preferred; most firmware operations can be performed on GUI screens or by CLI
commands on the command line. When using either interface, the availability of firmware functions for your user
login account depends on your current user access rights as granted by the system administrator.
Usernames and Passwords
The Switched PRO2 is shipped with one default administrative user account (username/password is admn/admn).
There is no “i” in the admn username or password.
Only an administrative user can manage user accounts, such as creating new user accounts, removing user
accounts, and changing user passwords.
The PRO2 supports a maximum of 112 defined user accounts with the following restrictions:
User Account
Length
Case-Sensitive
Spaces Allowed
Usernames
1-32 characters
No
No
Passwords
1-32 characters
Yes
Yes
Note: For security, Server Technology recommends first creating a new user account with administrative
rights, and then removing the default admn account.