Server Technology switched pro2 User Manual - page 48
Switched PRO2 – User Guide
Using the Web Interface
•
48
Control (Managing Outlets)
The Control section of the Web interface allows the issuing of outlet control actions On, Off, and Reboot for
individual outlets in a master unit (or in all units), for all outlets globally in a master unit (or in all units), and for
named outlet groups.
Outlet details are also available by individual outlet to
provide the outlet’s general identification, socket type,
capacity, operational state, power factor, as well as color-coded graphs for current and power.
A PRO2 unit with Per Outlet Power Sensing (POPS) technology will also display values for current capacity used
and reactance.
Control > Outlets
The Outlet Control page displays outlets assigned to the current user:
What to look for:
• Provides viewing of outlet current, power, power factor, current control state applied to the PRO2,
and status information.
• Includes an ID link for viewing detailed operational data about the outlet.
• Allows the issuing of outlet power control actions (On, Off, Reboot) on individual outlets or on all outlets
globally, in a master unit or in all units.
To issue outlet control actions (globally on all outlets or on individual outlets):
1. From the Selected Unit drop-down menu, choose All or Master. The page refreshes to show the outlets
available for the selected unit.
2. To issue outlet control globally on all displayed outlets, from the Control Action drop-down menu, select All
On, All Off, or All Reboot. To issue outlet control on one or more individual outlets, from the Control action
drop-down menu for the individual outlet(s), select On, Off, or Reboot.
3. Click Apply. The command action is issued immediately on the specified outlet(s).