Server Technology switched pro2 User Manual - page 198
Switched PRO2 – User Guide
Using the Command Line Interface (CLI)
•
198
show system
Shows system uptime, firmware version, firmware build information, boot version,
hardware version, number of active users, and location string.
Command Syntax
show system
Command Access
Admin level only
Example
Switched CDU: show system
System Information
Uptime: 1 day 20 hours 0 minutes 13 seconds
Firmware: Sentry Switched CDU Version 8.0a
Build Info: Rev 1032, January 7 2015, 10:52:42
Boot Info: 4.0d-r139
Hardware: NIM2-1L (129), 75 MHz, 16MB RAM, 4MB FLASH
NIC S/N: 9600165
Active Users: 1
Location: PIPS-POPS Switched
show tacacs
Shows TACACS+ configuration values.
Command Syntax
show tacacs
Command Access
Admin level only
Example
Switched CDU: show tacacs
TACACS+ Configuration
TACACS+: disabled
Primary Host:
Secondary Host:
Port: 49
Key:
show trend
Shows power trending configurations.
Command Syntax
show trend
Command Access
Admin level only
Example
Switched CDU: show trend
Trending Configuration
Data Trending: enabled