3Com OfficeConnect 3C100XF Cli User's Manual - page 100
12-12
C
HAPTER
12: IP R
OUTING
C
OMMANDS
State
- state of the network;
Ena(bled)
Or
Dis(abled)
Type
-
Static
(user-specified
), Auto (
default)
or Dynamic
network
Network address
- address of the IP network
list ip pools
Displays the IP pools you configured with the add ip pool command. It lists the
following information:
Name
- Pool designation
address
- Initial IP address and subnet mask of specified pool
Size
- Number of IP addresses you made available in the pool
InUse
- Number of IP addresses currently in use within the pool
State
- Conditional status of the IP pool. This value is either
Public
or
private.
Route
- Indicates whether pool is being broadcast as a single network
(
aggregate
)
or separate networks
(
no_aggregate
).
Status
- Indicates current condition of pool. Values displayed are as follows:
Active
- pool is available to assign user IP addresses from.
Remove
- pool size is being modified or the base address of the pool is
being modified. No users can be assigned from the pool until operation is
completed.
Remove_pending
- pool size is being modified and an active user is
currently using a pool entry that needs to be removed. Users can be
assigned from the pool in this state.
Delete_pending
- pool is being deleted but an active user has been
assigned out of this pool and must wait until user disconnects to delete the
pool. Users are not assigned from the pool in this state.
list ip routes
Displays all the statically defined IP routes that you previously defined using the
add ip route
command
, a
s well as any routes learned via RIP and system-defined
routes (loopback). This reflects information collected from the Forwarding Table.
Aggregate routes are not displayed by this command. See the
list ip pools
command for their display.
The command lists:
Name
Prot
Int
State
Type
Network address
atm1483
IP
atmaal:1
ENA
STAT
204.249.180.46/C
ipnet
IP
eth:1
ENA
STAT
134.134.144.156/
22
internal
IP
internal
ENA
STAT
2.2.2.2/A
IP-loopback
IP
loopback
ENA
AUTO
127.0.0.1/A
Name
Address
Size
InUse State
Route
Status
ippool
166.165.165.
155 /H
20
15
PUBLIC
NO_AGGREGATE
ACTIVE
ippool 2
166.165.165.
135 /28
2
1
PUBLIC
AGGREGATE
ACTIVE