3Com OfficeConnect 3C100XF Cli User's Manual - page 113
Show Command
12-25
show ip network
show ip
network
settings
These commands
display the following parameter settings for the specified IP
network:
Interface
- interface this IP network runs on.
Configured Network address
- network address and subnet mask of the
OfficeConnect Gateway.
Frame Type
- frame type used by the OfficeConnect Gateway. Choices:
ETHERNET_II, SNAP, atm1483, atm1483mer, fr1483, fr1483mer, fr1490,
or
fr1490mer
.
Mask
- subnet mask of OfficeConnect Gateway.
Station
- station address of OfficeConnect Gateway.
Broadcast Algorithm
- broadcast algorithm used for this network. The default
is
IETF
.
Max Reassembly Size
- maximum packet size allowed to be reassembled
from fragments.
IP Routing Protocol
- routing protocol used. The default is
None
.
IP RIP Routing Policies
- routing policies used by RIP.
IP RIP Authentication Key
- text string used for RIPv2 authentication.
IP System Host address:
134.225.22.1760
IP Forwarding:
ENABLED
IP Address Pool Filtering:
ENABLED
IP Address Pool Round Robin:
ENABLED
Source IP Address Filter
IP Multicast Proxy Interface:
Eth:1
IP Multicast Heartbeat Status:
DISABLED
IP Multicast Heartbeat Interface:
NONE
IP Multicast Heartbeat Group:
0.0.0.0
IP Multicast Heartbeat Time:
60 seconds
IP Multicast Heartbeat Window:
5
IP Multicast Heartbeat Threshold:
3
IP Source Address for RADIUS
IP source address for SYSLOG:
0.0.0.0
IP local address for unnumbered links:
0.0.0.0
IP source address for IGMP:
0.0.0.0
IP source address for PPTP PAC
0.0.0.0
IP source address for L2TP PAC
0.0.0.0
IP source address for VTP
0.0.0.0
IEA send unsolicited Proxy ARP:
DISABLED
IP proxy ARP for all dialin addresses
DISABLED
Send ICMP Host Unreachable for Pool:
DISABLED
IP source address for PING:
0.0.0.0
IP source address for Trace Route:
0.0.0.0
IP Respond to Directed Broadcast packets:
ENABLED
IP Directed broadcast forwarding:
DISABLED
IP Multicast traffic affects inactivity:
DISABLED