3Com OfficeConnect 3C100XF Cli User's Manual - page 169
CLI Commands
19-5
Data Channel Delayed Acknowledgement Timeout
- Interval in
milliseconds PPTP will wait to send acknowledge its peer when there are no
data or control packets to piggyback the acknowledge to. The default is
500
.
Data Channel Reassembly Timout
- Interval in milliseconds PPTP uses to
determine the window to use before reassembling out-of-order packets. A low
value increases the chance that out-of-sequence packets will be lost. A high
value increases the period when PPTP processes packets received out of order.
The default of 0 may drop all out-of-sequence packets.
Data Channel Receive Packet Window
- Size of the data channel receive
window sent to PPTP’s peers. The default is
7
.
Inactivity Idle Timeout
- Interval in seconds PPTP will wait inactively and send
a Hello packet. The default is
0
.
Echo reply timeout
- Interval in seconds PPTP waits until a time-out occurs in
receiving a response to the Hello message.
Load balance status -
Whether load balancing is
enabled
or
disabled
.
Logging Level
- The logging level PPTP is set to. Choices:
Disabled, Control
Packets, Control and Data Packet Headers and Control
and
Data Packets
Pptp Pns
- Displays the state of PPTP network server support .
show pptp tunnel
Displays statistics of the specified PPTP tunnel. It lists the following information:
Local control tunnel ID
- identifier of the specified local control tunnel
Peer control tunnel ID
- identifier of the specified remote control tunnel
Control tunnel state
- current status of the specified control tunnel
Local init connection
- indicates whether tunnel was established locally or not
IP address
- remote peer’s IP address
Local receive packet window
- size of local send window
Remote receive packet window
- size of remote receive window
Control tunnel receive packets
- sum of control packets received on the
control tunnel
PPTP SETTINGS
Maximum Number of Sessions:
451
Maximum Number of Tunnels:
451
Number of Control Channel Seek Descriptors:
64
Flow Control:
ENABLED
Data Channel Delayed Acknowledgement Timeout
500
Data Channel Reassembly Timout
0
Data Channel Receive Packet Window:
7
Inactivity Idle Timeout:
60
Echo reply timeout:
90
Load balance status:
ENABLED
Logging Level:
CONTROL PACKETS
Pptp Pns
:
ENABLED