3Com OfficeConnect 3C100XF Cli User's Manual - Dministrative
3
A
DMINISTRATIVE
CLI C
OMMANDS
Overview
This chapter identifies and describes the administrative-related CLI commands of
the OfficeConnect Gateway. These commands are identified in the following list:
Time and Date Commands
NTP (Network Time Protocol) Commands
System Information Commands
Script Commands
File Commands
Uploading Configuration Files (Bulk File) Commands
Restore Factory Default Settings (Reset) Command
Reboot Command
Date and Time
The OfficeConnect Gateway uses the Network Time Protocol (NTP) to accurately
establish date and time for the unit.
You can use the
show time
command to confirm that date and time have been
established.
Date and time values are automatically set when the OfficeConnect Gateway is
powered up. Optionally, the following CLI commands can be used to manually set
these values.
The following table identifies the Date and Time commands accessible from the
CLI.
Command
Type
Command Name
Set
set date
set date
time
set time
set timezone
Show
show time
show date