3Com OfficeConnect 3C100XF Cli User's Manual - page 34
2-4
C
HAPTER
2: L
IST
OF
O
FFICE
C
ONNECT
G
ATEWAY
CLI C
OMMANDS
LOGOUT Command
Use the
LOGOUT
command to quit and logout of the Console Telnet CLI session.
PING Command
Use the
PING
command to send an ICMP echo request to a remote IP host A reply
from the pinged address indicates success.
QUIT Command
Use the
QUIT
command to quit the Console Telnet CLI session.
REBOOT Command
Use the
REBOOT
command to reboot the OffIceConnect Gateway. Make sure that
you save your changes using the
SAVE ALL
command before rebooting.
RECONFIGURE
Command
Use the
RECONFIGURE
IP
command to automatically reconfigure IP network
parameters of an established static IP LAN or PVC network.
RENAME Command
Use the
RENAME
command to rename files within the FLASH file system.
RESET Commands
Use the
RESET
command to reset the following parameters:
RESOLVE Command
Use the
RESOLVE
NAME
command to return an IP address for a specified host
name to DNS for resolution.
RLOGIN Command
Use the
RLOGIN
command to establish a remote login Console Telnet CLI session.
SAVE Command
Use the
SAVE
ALL
and
SAVE CONFIGURATION
commands to save your CLI
changes. The
SAVE ALL
command will permanently save your changes.
SET Commands
Use the
SET
command to edit the following system parameters:
POLICY
PPP
PPPOE
PPPOE_CLIENT
PPTP
PROCESSES
PROFILES
RTAB
SA
SESSIONS
SNMP
SYSLOGS
TCP
TELNET
TFTP
TIMEZONE
TRACEROUTE
TUNNEL
TUNNELS
UDP
USERS
VIRTUAL
VOICE
CONFIGURATION
DHCP_PROXY
DHCP_CLIENT
DHCP_SERVER
PPPOE
BOOTB_MGR
BRIDGE
BULK_FILE
CLEARTCP
COMMAND
DATE
DHCP_PROXY
DHCP_SERVER
DNS
FACILITY
FRAMED_ROUTE
FTP
HTTP_SERVER
ILMI
INTERFACE
IP
L2TP
MAXIMUM_LOCAL_USERS
NAT
NETWORK