3Com OfficeConnect 3C100XF Cli User's Manual - Snmp C
25
SNMP C
OMMANDS
Overview
SNMP (Simple Network Management Protocol) is a standardized method of
managing and monitoring network devices on TCP/IP-based internets.
This chapter identifies and describes the SNMP commands accessible from the
OfficeConnect Gateway CLI. The following table identifies the SNMP CLI
commands:
Command
Type
Command Name
Add
add snmp community
add snmp community_pool
add snmp trap_community
add snmp trap_community_pool
addresses
Delete
delete snmp community
delete snmp community_pool
address
name> delete snmp trap_community delete snmp trap_community_pool addresses Enable enable link_traps_interface enable security_option snmp user_access enable snmp authentication traps Disable disable link_traps_interface disable security_option snmp user_access disable snmp authentication traps List list snmp communities list snmp community_pools list snmp trap_communities list snmp trap_community_pools Set set snmp community set snmp trap_community Show show snmp show snmp community_pool show snmp trap_community_pool show snmp counters