3Com OfficeConnect 3C100XF Cli User's Manual - Tftp C
28
TFTP C
OMMANDS
Overview
TFTP (Trivial File Transfer Protocol) is a simplified version of the TCP/IP File Transfer
Protocol that allows the transfer of files from one computer to another over a
network. TFTP does not include password protection or user-directory capability.
This chapter identifies and describes the TFTP commands accessible from the
OfficeConnect Gateway CLI. The following table identifies the TFTP CLI
commands:
TFTP Command
The
tftp
command initiates TFTP service from the CLI.
tftp
Specify an IP address/name to directly access the client or issue the
tftp
command
with your choice of ancillary values. Alternatively, you can use the
add tftp
request
enable tftp request
The
tftp
command parameters are described in the following table:
Command
Type
Command Name
TFTP
tftp
List
list tftp clients
list tftp requests
Add
add tftp client
add tftp request
Delete
delete tftp client
delete tftp request
Enable
enable tftp request
Disable
disable tftp request
Set
set tftp request
Show
show tftp request
Value
Effect
ascii
Set text mode to ASCII.
Default
binary
Set text mode to OCTET
connect [host_name]
Connect to the remote TFTP server