3Com OfficeConnect 3C100XF Cli User's Manual - page 181
Super NAT
21-5
Intelligent NAT directs the frame to the local client which currently has other
existing connection(s) with the remote host. If more than one local client has
existing connections, then the client who initiated the most recent session is
chosen.
Super NAT
Your OfficeConnect Gateway supports Super NAT. With Super NAT, the
OfficeConnect Gateway makes optimum use of available IP addresses, and
automatically switches from NAT to PAT or PAT to NAT as necessary.
NAT Default
Workstation
It is sometimes necessary to configure the
NAT Default Workstation
. This field
should be set to the private address of a workstation on the local LAN. If a data
packet is received on the WAN port and a port mapping does not exist, the frame
will be translated using the
Default Workstation
.
Monitoring NAT
Use the following commands to display NAT sessions, statistics and policies:
list nat
The
list nat
command displays information for Network Address Translation (NAT)
connections. The command has the following parameters:
interfaces
statistics
Parameter
Description
interfaces
Displays the Interface Name and NAT option
stats
Displays statistics for the Network Address Translation (NAT) connections as
shown here:
The COUNTER FOR OUTGOING SESSIONS
Total Successfully created sessions: 0
Total Failed sessions: 0
Total Translated incoming packets: 0
Total Discarded incoming packets: 0
Total Translated outgoing packets: 0
Total Discarded outgoing packets: 0
The COUNTER FOR INCOMING SESSIONS
Total Successfully created sessions: 0
Total Failed sessions: 0
Total Translated incoming packets: 0
Total Discarded incoming packets: 0
Total Translated outgoing packets: 0
Total Discarded outgoing packets: 0
policies