3Com OfficeConnect 3C100XF Cli User's Manual - page 91
Add Commands
12-3
Add Commands
add ip defaultroute
gateway
name> metric Allows a default route to be configured. The command adds a default route with a gateway on the IP network configured on the OfficeConnect Gateway LAN interface (eth:1), or on a PVC interface. This allows a default route to be configured. A default route gateway specified with a lower metric acts as the primary default route gateway and a second default route gateway with a higher metric acts as the secondary default route gateway. If one interface goes down, the default route gateway associated with that interface is disabled. If a second default route gateway associated with a still-alive Show show all ip networks show ip counters show ip rip counters show ip show ip settings show ip network show ip network settings show ip routing show ip routing settings show all active interfaces show all connections show all filters show all interfaces show all ip networks show all lan interfaces show all networks show command settings show configuration, show configuration settings show maximum_local_users show memory show memory utilization show ip source_based_routing show network , show network settings show packet_logging, show packet_logging settings show session show system, show system settings Reconfigure reconfigure ip network