3Com OfficeConnect 3C100XF Cli User's Manual - page 231
Show Command
28-5
server
These parameters are described in the following table.
Show Command
The
show tftp request
specified request for TFTP service.
show tftp request
It lists the following information:
Filename
- Name of file to be requested from or sent to the TFTP server.
Server
- Name or IP address of the TFTP server
Action
- Type of request sent to the TFTP server.
PUT
or
GET
Mode
- The text format the file is transmitted as. Choices:
ASCII
or
OCTET
(binary). The default is
ASCII
.
Retransmit Timeout
- Interval in seconds the OfficeConnect Gateway waits
for a reply from the TFTP server before retransmitting a TFTP request. The range
is
1-60
. The default is
5 seconds
.
Maximum Timeout
- Interval in seconds the OfficeConnect Gateway waits for
a response from the TFTP server before the TFTP request is cancelled. The range
is
1-300
. The default is
25 seconds
.
Status
- State of each current TFTP request in the table:
Normal
- Request is in the table or has been successfully completed
Getting
- Initial state: TFTP server is receiving a file
Putting
- Initial state: TFTP server is sending a file
Error
- Request has finished unsuccessfully and will generate an error
message
Error String
- Error message detailing why TFTP request has failed
Parameters
Description
action
Type of request sent to the TFTP server. Choices:
Put
or
Get
max_timeout
Interval in seconds OfficeConnect Gateway waits for a response from the
TFTP server before the TFTP request is cancelled. The range is
1-300
. The
default is
25 seconds
.
mode
The text format the file will be transmitted as. Choices:
ascii
or
octet
. The
default is
ASCII
.
rexmt_timeout
Retransmission timeout - interval in seconds OfficeConnect Gateway
waits before retransmitting a TFTP request. The range is
1-60
. The default
is
5 seconds
.
server
Name or IP address of the TFTP server.