3Com OfficeConnect 3C100XF Cli User's Manual - page 48
3-12
C
HAPTER
3: A
DMINISTRATIVE
CLI C
OMMANDS
Reset Command
reset
Use the
reset
command to restore the following OfficeConnect Gateway settings
to their factory default configuration values.
configuration
DHCP_client_network
DHCP_server_settings
DHCP_server_counters
DHCP_proxy_counters
pppoe counters
The following table describes these settings.
Also see the
set bulk_file
Set Command
set reset_action
|
none>
The
set reset_action
the ability to manually restore factory default settings by pressing and holding the
reset button, combined with a power cycle.
CAUTION:
We recommend that you not use this command unless you are an
expert user.
Using this command and disabling the manual restore will result in an
unusable OfficeConnect Gateway unit.
Reset
reset configuration
reset DHCP_client_network
reset DHCP_server_settings
reset DHCP_server_counters
reset DHCP_proxy_counters
reset pppoe counters
Set
Set reset_action
Show
Show reset_action
Parameters
Description
configuration
Restores individual OfficeConnect Gateway configuration files
(.CFG) from a bulk configuration file. The bulk configuration
function reads all configuration files generated by the
OfficeConnect Gateway processes and concatenates them into a
single compressed file which can then be uploaded by the
OfficeConnect Gateway. A bulk configuration file can be named
using the
set bulk_file
command.
DHCP_client_network
Resets DHCP client network settings to default values.
DHCP_server_settings
Restores the DHCP server settings to initial default values.
DHCP_proxy_counters
Resets the DHCP Proxy counters.
pppoe counters
Resets the PPPoE session counters.