3Com OfficeConnect 3C100XF Cli User's Manual - page 68
6-6
C
HAPTER
6: B
RIDGING
C
OMMANDS
and on the state of the MAC-Encapsulated Routing parameter in the remote site
profile.
In general, a packet received in a routed encapsulation (such as IPCP or Routed
RFC 1483) is delivered to the router. A packet received in a bridged encapsulation
is passed on to the bridge. If MAC-Encapsulated Routing is enabled, the received
(bridge-encapsulated) packets are delivered to the router.
list bridge forwarding
The
list bridge forwarding
command displays the forwarding and filtering
information.
MAC address
- A unicast MAC address for which the bridge has forwarding
and/or filtering data
Status
— One of:
other
— not one of the following
invalid
— aged out
learned
— learned, and in use
self
— statically defined, and in use
mgmt
— unknown, but filtering information exists
RxPkt
— Number of packets received from this MAC station
RxOctets
— No. of bytes (octets) received from this MAC station
Fltr
— Number of packets received from this MAC station that were filtered
out (discarded)
Fwd
— Number of packets received from this MAC station that were
forwarded
TxPkt
— Number of packets forwarded to this MAC station
TxOctets
— Number of bytes forwarded to this MAC station
show bridge network
The
show bridge network
information:
counters
[Received Frames, Transmit Frames, Discarded]
settings
[Interface, Network Address, Frame Type, Status, User Name,
Spanning Tree Enabled]
Parameters
Description
counters
Displays information about the specified bridge network. It lists:
Received Frames
—
Packet frames which have been received
Transmit Frames
—
Packet frames which have been sent
Discarded
—
Packet frames which have been thrown away