3Com OfficeConnect 3C100XF Cli User's Manual - page 122
12-34
C
HAPTER
12: IP R
OUTING
C
OMMANDS
System Name
- modify using
set system
command
System Location
- site where system is located. Modify using
set system
command
System Services -
for example, Internet EndToEnd Applications
System Transmit Authentication Name
- system-wide keyword for PPP on
the WAN, modified using
set system
command
System Version
- loaded release version of the system software
.
Reconfigure
Commands
reconfigure ip network
Automatically reconfigures IP network parameters of an established static IP LAN
or PVC network. This command changes network parameters without the
administrator having to remove the router from service by manually disabling the
network, modifying its parameters and re-enabling it. This command modifies
static
IP LAN networks only (cannot change interface and frame values for an
internal
address). Network and interface names are limited to 64 ASCII characters.
This command has the following parameters:
address
interface