3Com OfficeConnect 3C100XF Cli User's Manual - page 112
12-24
C
HAPTER
12: IP R
OUTING
C
OMMANDS
Gateway’s
Eth:1
port or the
username
associated with the remotely attached
host. The default is
None
.
IP Multicast Heartbeat Status -
Indicates whether multicast heartbeat is
Enabled
or
disabled.
The default is
disabled
.
IP Multicast Heartbeat Interface
- The interface on which multicast traffic
for the specified group is monitored:
eth:1 or slot:x/port:y.
The default is
None
.
IP Multicast Heartbeat Group
- The IP address of the multicast group being
monitored.
IP Multicast Heartbeat Time
- The interval, in seconds, multicast traffic is
being monitored. The default is
60 seconds
. The range is
0-65535
.
IP Multicast Heartbeat Window
- The number of periods (in time values)
multicast traffic is being monitored. The default is
5
. The range is
0-255
.
IP Multicast Heartbeat Threshold
- The interval during which multicast
traffic is not received after which an SNMP trap is issued. The default is
3
. The
range is
0-65535
.
IP Source address for SYSLOG
- OfficeConnect Gateway’s source IP address
(where packets exit) supplied to an associated SYSLOG server.
IP Source address for RADIUS
- OfficeConnect Gateway’s source IP address
supplied to an associated RADIUS server.
IP Local address for Unnumbered Links
- Ethernet IP address supplied to
remote PPP users when they dialup the OfficeConnect Gateway
IP source address for IGMP
- If configured, all IGMP packets sent from any of
the OfficeConnect Gateway’s interfaces will use this address as its source
address. The default is
0.0.0.0
.
IP source address for PPTP PAC
- OfficeConnect Gateway’s source IP address
(where packets exit) associated with a PPTP connection.
IP source address for L2TP PAC
- OfficeConnect Gateway’s source IP address
(where packets exit) associated with an L2TP connection.
IP source address for VTP
- OfficeConnect Gateway’s source IP address that is
used fro VTP.
IEA send unsolicited proxy ARP
IP proxy ARP for all dial-in addresses
Send ICMP Host Unreachable for Pool
- Enables and sends ICMP
unreachable for pool addresses. This feature is disabled by default.
IP source address for PING
- OfficeConnect Gateway’s source IP address that
is used as the source of PING messages sent.
IP source address for Trace Route
- OfficeConnect Gateway’s source IP
address that is used as the source of traceroute messages sent.
IP Respond to Directed Broadcast packets
- Enables the OfficeConnect
Gateway to respond to ICMP requests or generate ICMP error messages for
packets coming to a directed broadcast address of its networks.
IP Directed broadcast forwarding
IP Multicast traffic affects inactivity
IP SETTINGS