3Com OfficeConnect 3C100XF Cli User's Manual - page 175
Delete Command
20-3
To configure a TELNET service to offer CLI access on port 6666, doing
authentication upon connect (default) and dropping the connection on hangup,
type the following:
add network service CLI_access server_type telnetd socket 6666 data
drop_on_hangup=on
Delete Command
The
delete network service
command deletes the specified network service
from the list of available services. You must use
disable network service
before
deleting the service
delete network service
You can see which services are available and active using the
list available
servers
and
list network services
commands
.
Enable Command
The
enable network service
command enables the network service that you
previously defined with the
add network service
command.
enable network service
You can see which services are currently defined and their state using
list
network services
.
Disable Command
The
disable network service
command disables a network service, such as
TELNET or TFTP.
disable network service
If
close_active_connection
was specified as TRUE in the
add network_service
command, then all active connections are closed when the service is disabled.
List Commands
This section describes the following List commands:
list network services
list available servers
list network services
The
list network services
command displays all network services you defined
using the
add network service
command. This command lists the following
information:
Name
- name of service. Values displayed are
TELNET
(default)
or
TFTP
(default),
Server Type
- type of network server. For example,
TFTPD
(TFTP daemon)
Socket
- TCP port number used (you assign or by default) by the service
Close
- reveals whether all connections close when you disable this service.
TRUE
or
FALSE
. See
add network service
command for details.
Admin Status
- the status you have requested for this service.
Enabled
or
disabled
. See the
add network service
command for details.
Name
Server Type
Socket
Close
Admin Status
1
TELNETD
61
FALSE
Enabled
DATA: modem_group="all",auth=off,service_type=dialout