3Com OfficeConnect 3C100XF Cli User's Manual - page 199
List Commands
25-7
Read/Only
- read-only access to user-level objects allowed
Read/Write
- read and write access to user-level objects and write access to
writable user-level objects allowed.
Administrator
- read access to all objects and write access to all writable
objects allowed
Community Pool
- Name for a pool of IP addresses comprising this SNMP
community
Validate address
- Method selected to determine access to this community.
The
use_address
command uses the specified IP address to validate access,
use_pool
uses the list of IP addresses specified in the
community_pool
value to
validate access. The type of information displayed for this command is shown
in the following example.
list snmp
community_pools
The
list snmp community_pools
command displays all entries in the SNMP
Community address Pool table. This command lists the following type of
information:
See
add snmp community_pool
pool_name
>
command for more information.
list snmp
trap_communities
The
list snmp trap_communities
command displays SNMP trap communities
defined using the
add snmp trap_community
command. It lists the following
information:
Community Name IP Address
- trap community designation for the
associated system
Community
Pool
- name of the trap community pool. If the trap community
pool does not exist and the
validate_address
parameter is configured to use the
trap community pool, the name of the trap community pool displayed is
preceded by an asterisk.
SNMP COMMUNITIES
Community
Name
IP
Address
Access
Community
Pool
Validate
address
home
149.122.1
45.23
Administrat
or
use_address
office
149.122.1
45.24
Read/Write
Boston
use_pool
washington
149.122.1
45.26
Read/Only
use_address
COMMUNITIY POOLS
Name
Number of
addresses
westboro
54
shrewsbury
43
worcester
149