3Com OfficeConnect 3C100XF Cli User's Manual - page 80
9-2
C
HAPTER
9: ARP C
OMMANDS
Add Command
add ip arp address
access_mac_address
interface
Adds static ARP entries and associates them with an interface. The values
interface
is not specified, the entry
is applied to all interfaces.
Note: use the
Arp
command to determine the MAC address of the client.
add ip arp address
state
[private |
public]
Adds an IP address to the static ARP table and designates it as a public or private
entry.
Clear Command
clear arp_cache
Deletes all data in the ARP cache without rebooting the OfficeConnect Gateway.
Issue the
list ip arp
command to display ARP statistics.
Delete Command
delete ip arp address
interface
Deletes the indicated IP address from the ARP table of the specified interface.
Parameter
Description
ip_addr
The IP address of the client that you are adding to the static ARP table.
mac_addr
The MAC address of the client that you are adding to the static ARP table.
interface_name
The interface that this client will be associated with in the static ARP table.
Parameter
Description
ip_addr
The IP address to add to the static ARP table.
state
private
- Only check for a static ARP entry for
the interface receiving the ARP request.
public
- If there isn’t a static ARP entry for the
current interface, check the table to see if the
IP address is set for all interfaces.
Parameter
Description
ip_addr
The IP address to delete from the ARP table.
interface
The interface associated with the specified IP address.