3Com OfficeConnect 3C100XF Cli User's Manual - page 201
Set Commands
25-9
These parameters are described in the following table.
set snmp trap_community
The
set snmp trap_community
parameters for an SNMP trap community (authorized user or host to which trap
notifications are sent). The community name and IP address of SNMP requests
from managers on the network must match the list, which you can view using the
list snmp trap_communities
command
.
The following parameters are associated with the
set snmp trap_community
address
trap_community_pool
trap_validate_address
[use_address | use_pool]
These parameters are described in the following table.
Parameters
Description
Group designation for a pool of management stations which
authorize SNMP requests.
access
Determines what type of access to SNMP MIBs the added user will
have. Options are Read Only (
RO
), Read Write (
RW
) and
Administrator (
ADM
). Administrator allows
read access to all
objects
and
write access to all writable objects
.
RO
is the default on
public (0.0.0.0) networks and
RW
the default on private networks.
address
IP address of this SNMP management station, expressed in the form
nnn.nnn.nnn.nnn
community_pool
Designation for the pool of IP addresses comprising this SNMP
community. The limit is
64
ASCII characters.
validate_address
Method to determine access to this management station. The
use_address
value uses the specified IP address to validate access.
The
use_pool
value uses the list of IP addresses specified in the
community_pool
value to validate access.
Parameters
Description
Trap group designation for a pool of management stations which
authorize SNMP requests.
address
IP address of this SNMP management station, expressed in the form
nnn.nnn.nnn.nnn
community_pool
Designation for the trap pool of IP addresses comprising this SNMP
community. The limit is
64
ASCII characters.
trap_validate_address Method to determine access to this management station. The
use_address
value uses the specified IP address to validate access. The
use_pool
value uses the list of IP addresses specified in the
trap_community_pool
value to validate access.