3Com OfficeConnect 3C100XF Cli User's Manual - page 54
4-4
C
HAPTER
4: C
ONFIGURING
AND
M
ANAGING
U
SERS
set framed_route user
Specifies a framed (static) network to the user profile for dialup connections. You
can configure the following parameters for this command:
gateway
ip_route
metric
Specifies a framed (static) network to the user profile for dialup connections.
set maximum_local_users
Configures the total number of users that can be created locally on the
OfficeConnect Gateway. See the
show maximum_local_users
command to
display settings. The maximum is 1024.
List Command
The
list users
command displays all users and parameters specified using the
add
and
set user
commands.
list users
It lists the following information:
User Name
- user designation specified using the
add user
command
Login Service
-
TELNET, RLOGIN, ClEARTCP, TELNET
Network Service
- type of network service. Default is
PPP.
Status
- link status.
ACTIVE
(in use),
INACTIVE
(not in use) or
DISABLED
(inactivated)
telnet_options
binary
- Enables binary transfers during telnet sessions.
escape
- Enables escape sequences during telnet sessions.
Entering this parameter with a no value disables that function. For
example; the command
set user
telnet_option
binary
escape
enables both the binary and escape telnet options. The
command
set user
telnet_option
escape
disables the
binary telnet option but leaves the escape option enabled.
type
Type of user added. A user may be one or more types but callback and
dialout are mutually exclusive.
Login
users are TCP users who use the login_service specified.
Network
users are framed protocol users, who use the
network_service specified.
Manage
users with system administration authority.
Manage_Readonly
users with read-only access.
Parameters
Description
User name specified for the framed network.
gateway
IP address of the gateway used to reach this remote network.
ip_route
IP address of the remote network
metric
Integer representing how far away the route is, in “hops” from other
routers. The range is
1-15
.