Garmin G900X Pilot's Manual - page 111
190-00726-00 Rev. A
Garmin G900X Pilot’s Guide
3-19
ENGINE INDICATION SYSTEM
3.4 EIS DISPLAY IN REVERSIONARY MODE
In reversionary display mode, the remaining display is re-configured to present PFD symbology together with
the EIS Display (refer to the System Overview for information about display Reversionary Mode).
When the G900X displays enter reversionary mode, the EIS is separated into three displays: Engine (identical to
the normal EIS Display on the MFD), Lean, and System. For a description of the Engine Display, refer to Section
3.1. The Lean Display presents temperature information and assistance for engine leaning. The System Display
shows various system parameters and fuel calculations. All three displays feature the Engine Manifold Pressure
Gauge, Tachometer, fuel flow, and trim indicators.
Figure 3-22 Reversionary Mode (IV/IV-P with TSIO-550-E)
EIS Display