Garmin G900X Pilot's Manual - page 199
GPS NAVIGATION
190-00726-00 Rev. A
5-41
Garmin G900X Pilot’s Guide
CLEARING VERTICAL CONSTRAINTS
Figure 5-32 Clear Vertical Constraints
Clearing a vertical constraint:
1)
Press the
Direct-to
Key to display the Direct-to Window.
2)
Press the
MENU
Key. With ‘Clear Vertical Constraints’ highlighted (Figure 5-32), press the
ENT
Key.
In addition to selecting a destination by an identifier, the Direct-to Window also allows the selection of
airports, VORs and NDBs by facility or city name (Figure 5-33).
Figure 5-33 Entering a Facility Name
Selecting a direct-to destination by facility or the name of a city:
1)
Press the
Direct-to
Key. The Direct-to Window is displayed with the waypoint identifier field highlighted.
2)
Highlight the facility or city name field.
3)
Enter the facility or city location of the desired waypoint. If duplicate entries exist for the entered facility or city
name, additional entries can be viewed by turning the small
FMS
Knob during the selection process.
4)
Press the
ENT
Key to confirm the selected waypoint.
5)
Press the
ENT
Key to activate a direct-to.
Any waypoint contained in the flight plan can be selected as a direct-to destination from the Direct-to Waypoint
Window when navigating an active flight plan.