Garmin G900X Pilot's Manual - page 36
Garmin G900X Pilot’s Guide
190-00726-00 Rev. A
1-24
SYSTEM OVERVIEW
ARC HSI
Displays HSI as a 140° viewable arc (Bearing Information windows unavailable)
BRG2
Cycles the Bearing 2 Information Window through:
NAV2: Waypoint frequency/identifier and distance information
GPS: Waypoint identifier and GPS distance information
OFF: Removes window
ALT UNIT
Displays softkeys for changing the Altimeter barometric setting and altitude displays to
metric units
METERS
Displays the current and Selected altitudes in meters in addition to feet, when selected
IN
Displays the Altimeter barometric setting in inches of mercury (in Hg)
HPA
Displays the Altimeter barometric setting in hectopascals (hPa)
STD BARO
Sets barometric pressure to 29.92 in Hg (1013 hPa if metric display is selected)
INSET
XPDR
IDENT
TMR/REF
NRST
ALERTS
OBS
PFD
CDI
Press the
CDI
Softkey to cycle through
navigation sources:
- GPS
- NAV1 (VOR/LOC)
- NAV2 (VOR/LOC)
Select the
BACK
Softkey to
return to the top-level softkeys.
Select the
IDENT
or
BACK
Softkey to return to the top-
level softkeys.
XPDR
STBY
ON
ALT
VFR
IDENT
BACK
ALERTS
CODE
IDENT
BACK
ALERTS
0
1
2
3
4
5
6
7
BKSP
BACK
Press the
OFF
or
BACK
Softkey
to return to the top-level softkeys.
DCLTR
DCLTR-2
DCLTR-3
DCLTR-1
TOPO
ALERTS
NEXRAD
(optional)
TERRAIN
XM LTNG
(optional)
OFF
TRAFFIC
INSET
STD BARO
BACK
ALERTS
WIND
HSI FMT
PFD
BRG1
BRG2
Select the
STD BARO
or
BACK
Softkey to return to the top-level
softkeys.
ALT UNIT
DFLTS
Select the
BRG1
/
BRG2
softkeys to display/remove
the Bearing Information
windows and cycle through
bearing sources:
- NAV1/NAV2
- GPS
GND
HPA
BACK
ALERTS
METERS
IN
BACK
ALERTS
OPTN1
OPTN2
OPTN3
OFF
BACK
ALERTS
360 HSI ARC HSI
Figure 1-19 PFD Configuration Softkeys