Garmin G900X Pilot's Manual - page 302
GPS NAVIGATION
190-00726-00 Rev. A
5-144
Garmin G900X Pilot’s Guide
CREATE NEW FLIGHT PLAN
Up to 99 flight plans with up to 99 waypoints in each flight plan can be created and stored in memory.
Creating a new flight plan:
1)
Press the
FPL
Key.
2)
Press the
F
MS
Knob to activate the cursor. The waypoint field is highlighted.
3)
Enter the identifier, city/state, or facility name of the airport/waypoint.
4)
Press the
ENT
Key. The cursor flashes on the next empty waypoint field.
5)
Enter the identifier for each additional waypoint.
6)
Press the
FPL
Key to remove the window.
ACTIVATE LEG
‘Activate Leg’ selects the highlighted leg as the “active leg” (the flight plan leg which is currently used for
navigation guidance).
Activating a flight plan along a specific leg:
1)
From the Flight Plan Window, press the
FMS
Knob to activate the cursor.
2)
Highlight the desired destination waypoint.
3)
Press the
MENU
Key.
4)
Highlight ‘Activate Leg’.
5)
Press the
ENT
Key. A confirmation window is displayed with ‘ACTIVATE’ highlighted.
6)
Press the
ENT
Key.
STORE FLIGHT PLAN
The active flight plan is erased when the G900X is powered off or when another flight plan is activated.
When storing flight plans with an approach, departure or arrival, the G900X uses the waypoint information
from the current database to define the waypoints in the flight plan. If the navigation database is changed
or updated, the G900X automatically updates the information if the procedure has not been modified. If an
approach, departure or arrival procedure is no longer available, the flight plan becomes “locked” until the
procedure is deleted from the flight plan or until the correct navigation database is installed.
Storing a flight plan:
1)
From the Flight Plan Window (once all of the waypoints have been entered), press the
MENU
Key to display the
page menu.
2)
Select ‘Store Flight Plan’.
3)
Press the
ENT
Key. The Store Flight Plan Window is displayed with ‘OK’ highlighted.
4)
Press the
ENT
Key to store the flight plan in the next available memory slot.
5)
Press the
ENT
Key.