Garmin G900X Pilot's Manual - page 284
GPS NAVIGATION
190-00726-00 Rev. A
5-126
Garmin G900X Pilot’s Guide
13)
Note the altitude constraints associated with each of the approach waypoints as seen in Figure 5-111. These
altitudes are loaded from the database and are initially displayed as white text, indicating these values are not
be used in computing vertical deviation guidance. The altitude values must be designated for use if they are to
be used in computing vertical guidance.
a)
Press the
FMS
Knob to activate the cursor.
b)
Turn the large
FMS
Knob to place the cursor in the altitude field associated with the IAF at HABUK as in Figure
5-115.
Figure 5-115 Designate HABUK Altitude Constraint
c)
Press the
ENT
Key. Note the altitude is now displayed as light blue text, indicating that the value is now used
in computing vertical guidance. The G900X uses baro corrected altitude when giving vertical guidance to these
waypoints.
d)
Turn the large
FMS
Knob to select the altitude constraint associated with FALUR as seen in Figure 5-116.
Figure 5-116 Designate FALUR Altitude Constraint