Garmin G900X Pilot's Manual - page 93
190-00726-00 Rev. A
Garmin G900X Pilot’s Guide
3-1
ENGINE INDICATION SYSTEM
SECTION 3 ENGINE INDICATION SYSTEM
NOTE:
The G900X Engine Indication System (EIS) is established based on the installed engine selected
during the software configuration process. Engine gauges, ranges, color bands, and caution and warning
indications are established based on the engine manufacturer’s recommended guidance.
The G900X Engine Indication System (EIS) displays critical engine, electrical, fuel, and other system parameters
on the left side of the MFD during normal operations (Figure 3-1). EIS information can be fully expanded to an
entire page (EIS - Engine Page) using the
ENGINE
Softkey (see Section 3.1).
Figure 3-1 MFD
EIS Display
Green bands on the instruments indicate normal ranges of operation; yellow and red bands indicate caution
and warning, respectively. White or uncolored bands indicate areas outside of normal operation not yet in the
caution or warning ranges. When unsafe operating conditions occur, the corresponding readouts flash to indicate
cautions and warnings. If sensory data to an instrument becomes invalid or unavailable, a red “X” is displayed
across the instrument.