Garmin G900X Pilot's Manual - page 269
GPS NAVIGATION
190-00726-00 Rev. A
5-111
Garmin G900X Pilot’s Guide
Upon completion of entering a new VS TGT the G900X:
• Periodically computes a new FPA using the selected VS TGT and current ground speed until the TOD
is reached
• Uses the newly computed FPA for the active waypoint with a vertical component
• Resumes periodic updates of the VS TGT using the new FPA and current ground speed. VNV profile
changes apply to the active waypoint only.
The active waypoint with a vertical component and its FPA is shown in the current VNV profile
information box.
Modifying the flight path angle from the Active Flight Plan Page:
1)
Select the FPA by selecting the
VNV PROF
Softkey followed by a clockwise turn of the large
FMS
Knob. It can
also be selected by scrolling past the end of the active flight plan waypoint list.
2)
Modify the value using the small
FMS
Knob. The FPA must be negative and cannot be less than the configured
minimum value.