Garmin G900X Pilot's Manual - page 53
190-00726-00 Rev. A
Garmin G900X Pilot’s Guide
1-41
SYSTEM OVERVIEW
NEAREST AIRPORTS
The Nearest Airports Box on the System Setup Page defines the minimum runway length and surface type
used when determining the nine nearest airports to display on the MFD Nearest Airports Page. A minimum
runway length and/or surface type can be entered to prevent airports with small runways or runways that are
not of appropriate surface from being displayed. Default settings are 0 feet (or meters) for runway length and
“any” for runway surface type.
Selecting nearest airport surface matching criteria (any, hard only, hard/soft, water):
1)
Use the
FMS
Knob to select the System Setup Page.
2)
Press the
FMS
Knob momentarily to activate the flashing cursor.
3)
Turn the large
FMS
Knob to highlight the runway surface field in the Nearest Airports Box.
4)
Turn the small
FMS
Knob to select the desired runway option (any, hard only, hard/soft, water) and press the
ENT
Key.
Selecting nearest airport minimum runway length matching criteria:
1)
Use the
FMS
Knob to select the System Setup Page.
2)
Press the
FMS
Knob momentarily to activate the flashing cursor.
3)
Turn the large
FMS
Knob to highlight the minimum length field in the Nearest Airport Box.
4)
Enter the minimum runway length (zero to 99,999 feet) and press the
ENT
Key.